Cart
0
Standard puck base footprint.
1 / 10Swipe or choose a view
Digital collection · 3D printing files
From your printer. Into your home.
Backed by 368 people on
A collection of 28 sculptural lamp designs to print, assemble and make your own. Choose a form you love, pick your filament and bring it to light.
28 lamp designsSTL filesBuild guides
Digital download only. A 3D printer, filament and separately purchased hardware are required. No physical lamp or electronics are shipped.
See per-lamp costs & printer fit ↗Help with printing, assembly and local component sourcing is available by email.
Designed by us. Made by you.
A design becomes a lamp.
- Choose & print. Pick a design, prepare the STL in your slicer and follow the printing guide.
- Fit the light. Use the correct base and the lighting components listed below.
- Assemble & enjoy. Fit the magnets and feet, let any adhesive cure, then add your printed shade.
Inside your download
- 28 lamp designs in STL format
- Matching base files
- Printing and assembly guidance
- Non-printable component list
St. Basil’s
Before your first print
A collection of designs. A little for each lamp.
Buy the files once. Choose your design, filament and light source, then make the lamp your own.
Choose a new shape whenever inspiration strikes.
Print the parts. Fit the light. Add your shade.
What does each lamp cost?
The digital collection is a one-time purchase. Each physical lamp needs filament and hardware. Make more lamps to spread the file cost further.
Planning inputs: 650 g, $20/kg filament and $2 for magnets and feet. Replace these with your chosen design’s slice and local prices.
Lighting example: Amazon US Prime offer, checked 7 Oct 2026. USB supply extra if needed; replacement puck fit needs checking. See the source below.
See checked prices & fit notes
US price check · 7 October 2026. Uczdru USB RGB puck, one pack: $5.94 with Prime during the checked promotion; $6.99 shown as the typical price. The calculator uses the checked $5.94 Prime offer, which can expire. Supplier drawing: 59.5 × 8.3 mm. The 60 mm adapter is included; retention and cable clearance still need a fit check. A suitable USB power supply is additional if you do not already have one.
Axmvez two-pack: $11.56 ($5.78 each), but exact puck dimensions were not confirmed, so it is not the default. IKEA MITTLED: $20 per light, plus a driver and power cord. AliExpress prices could not be rechecked.
Magnet and foot costs are a separate editable allowance. Tax, shipping and any additional power supply are extra. Check the current price and chosen variant before ordering.
Digital collectionLuminark 1.0 · 28
Your selected licensePersonal
Collection price · paid once$42.00 USD
Design cost per lamp*$1.50
*Collection price divided by 28 designs, assuming you make one of each. Designs are not sold individually.
Filament —
Lighting · per lamp—
Magnets & feet · allowance—
Per-lamp planning total*—
Includes the allocated design cost above. Materials are USD estimates; other currencies are shown separately. Tax, shipping, power supply, electricity, tools and failed prints are extra.
Check the chosen shade’s height and width in your slicer. The base footprint is a starting point, not a guarantee that every shade fits the same printer.
Luminark 1.0 + 2.0
More designs. Less for each lamp.
28 originals + 36 new designs. Choose a license for each collection and save 15% on the combined price.
Your collection bundle−15%
$84.00 USD$71.40 USD
Save $12.60 USD
Digital design cost per lamp*
Buy NowBoth collections →
$1.31 $1.12
Personal: print for yourself. Commercial: sell physical prints from that collection. Digital files cannot be shared or resold.
*Digital license price divided by 64 designs, assuming one lamp from each design. Full bundle paid upfront; filament and hardware are extra. Designs are not sold individually.
Both collections, one checkout. Your 15% bundle saving is applied automatically. Taxes calculated at checkout.
Luminark 1.0
All 28 designs. Find your favourite.
Every design in Luminark 1.0 is shown below. Browse the full collection or choose a series.
Ammonite
Nature190 × 190 × 204 mm · shade
St. Basil's
Architectural190 × 190 × 231 mm · shade
Pantheon
Architectural190 × 190 × 173 mm · shade
Notre-Dame
Architectural190 × 190 × 225 mm · shade
Sand Dune
Nature190 × 190 × 221 mm · shade
Dyson Sphere
Futuristic190 × 190 × 214 mm · shade
Flower of Life
Sacred Symbols190 × 190 × 207 mm · shade
Colosseum
Architectural190 × 190 × 230 mm · shade
Square Colosseum
Architectural
Sagrada Família
Architectural
Baobab
Nature
Stalagmite
Nature
Pine Needle
Nature
Golden Spiral
Geometry & Math
Möbius
Geometry & Math
Torus Knot
Geometry & Math
Truncated Icosahedron
Geometry & Math
Hypar Shell
Geometry & Math
Vitruvian Man
Culture & Myth
Helm of Awe
Culture & Myth
Labyrinth
Culture & Myth
Sri Yantra
Sacred Symbols
Tree of Life
Sacred SymbolsIncluded in the collectionPillars of Creation
Pillars of Creation
Space
Lagrange Points
Space
Neural Mesh
FuturisticIncluded in the collectionTerraforming Tower
Terraforming Tower
Futuristic
Synthetic DNA
FuturisticShade dimensions are X × Y × Z, rounded up in millimetres. Check the chosen design in your slicer and allow room for the base, supports and brim.
See the complete collection
Full-size puck-route shade dimensions, X × Y × Z in millimetres:
- Pantheon: 190 × 190 × 173 mm
- Colosseum: 190 × 190 × 230 mm
- Square Colosseum: 190 × 190 × 199 mm
- Notre-Dame: 190 × 190 × 225 mm
- Sagrada Família: 190 × 190 × 225 mm
- St. Basil's: 190 × 190 × 231 mm
- Ammonite: 190 × 190 × 204 mm
- Sand Dune: 190 × 190 × 221 mm
- Baobab: 190 × 190 × 232 mm
- Stalagmite: 190 × 190 × 230 mm
- Pine Needle: 190 × 190 × 226 mm
- Golden Spiral: E27 version only in this preview; puck file requires correction.
- Möbius: 193 × 190 × 231 mm
- Torus Knot: 190 × 190 × 232 mm
- Truncated Icosahedron: 190 × 190 × 191 mm
- Hypar Shell: 190 × 190 × 218 mm
- Vitruvian Man: 190 × 190 × 231 mm
- Helm of Awe: 190 × 190 × 227 mm
- Labyrinth: 190 × 190 × 223 mm
- Sri Yantra: 190 × 190 × 223 mm
- Flower of Life: 190 × 190 × 207 mm
- Tree of Life: 190 × 190 × 232 mm
- Pillars of Creation: 190 × 190 × 232 mm
- Lagrange Points: 190 × 190 × 196 mm
- Dyson Sphere: 190 × 190 × 214 mm
- Neural Mesh: 190 × 190 × 228 mm
- Terraforming Tower: 190 × 190 × 228 mm
- Synthetic DNA: 190 × 190 × 229 mm
A little planning. A better build.
What else will you need?
Buy components separately. Match the dimensions below before ordering; supplier prices and shipping vary by country.
60 mm USB puck route
Use the included adapter to fit a 60 mm puck into the 83 mm puck base. A simple USB-powered option.
View specifications & sourcing links
Use the file 83mm puck to 60mm puck adapter.stl from the puck-base folder. Check puck height, cable exit and retention before final assembly.
- 60 mm diameter, 5 V USB LED puck; match your power supply to its rating.
- 8 × N52 magnets, 12 mm diameter × 2 mm thick.
- 4 adhesive feet, 10 mm diameter × 3 mm thick.
Candidate: AuyiHomu 60 mm USB puck on Amazon US (2 W, approximately 8.9 mm tall; listed in cool white). This replacement has not been physically fit-tested. Check the selected variant and delivery to your country.
Original BOM links: 12 × 2 mm magnets · feet.
Golden Spiral is currently listed with its E27 version; its puck file needs correction before this route is offered for that design.
83 mm IKEA puck route
The original puck-light configuration, using the standard printed puck base.
View specifications & sourcing links
The guide specifies IKEA MITTLED, 83 mm diameter × 11 mm high. It requires a separate compatible IKEA driver and the correct regional power cord; it is not a USB puck.
Use 8 × N52 12 × 2 mm magnets and 4 × 10 × 3 mm adhesive feet.
IKEA MITTLED specifications (Netherlands). Use your local IKEA store for regional availability. KAPPLAKE is a different size.
E26 / E27 bulb route
Use the bulb-style base and hardware for a conventional LED bulb.
View specifications & sourcing links
- Prewired E26/E27 socket holder with a 40 mm external mounting thread. Choose the correct plug and voltage for your country.
- LED bulb, no more than 100 mm tall × 65 mm diameter. Match its cap to the holder.
- 8 × N52 magnets, 8 mm diameter × 5 mm thick.
- 4 adhesive feet, 10 mm diameter × 3 mm thick.
Original BOM links: socket holder · 8 × 5 mm magnets · feet. These listings can change; select the exact specification above.
Use LED lighting only. Follow the assembly guide and the electrical component manufacturer’s instructions.
Our component sourcing promise
Can’t find a part in your country?
Email us with the project name, the component you need and your country. We’ll send you a country-specific purchase link and add suitable alternatives to this guide.
Make it. Sell it.
Turn your printer into a lamp collection.
Choose the Commercial license to sell physical lamps made from these designs. Build a range in your own colours, photograph your finished pieces and offer customers something they can’t pick up in every shop.
- Sell physical prints under the selected commercial license.
- Offer different designs and filament colours from one collection.
- Keep the digital files private; the license does not allow file resale or sharing.
A look inside the files
Know what you’re getting.
Printable STL models, PDF guides and an assembly video. Open the STLs in your preferred slicer and follow the guide for your chosen lighting route.
Preview the printing advice
From the included printing guide: use a 0.2 mm layer height and 2–3 walls. Keep the base flat on the bed and the shade opening facing up. Use supports where needed, then clean mating surfaces before assembly.
White filament gives a softer glow; dark filament keeps more light within the designed openings. Test magnet polarity before gluing. PETG is recommended for the bulb route; use LED lighting.
Luminark 1.0
- STLs
- Puck LED Lamps — shades, base and 60 mm adapter
- Lamps with Bulb base — E27 shades and bases
- Optional stand components
- Documentation
- Important Note for You.pdf
- Important Tips & Printing Guide.pdf
- List of Non-3D Printable Components.pdf
- Tutorial
- Assembly.mp4
- LAMP ASSEMBLY MANUAL.pdf
Folder preview from the project package. Printer-ready G-code, filament and hardware are not included.
Before you print
A few useful answers.
Is this a finished lamp?
No. You are buying digital files to make the lamps with your own 3D printer. Filament, lighting, magnets, feet and tools are not included.
Which license should I choose?
Choose Personal for your own use, or Commercial if you plan to sell physical prints. Neither option permits sharing or reselling the digital files. The included license terms apply.
Can I buy the components locally?
Yes—shop by the dimensions and electrical specifications in the guide, rather than by a listing photograph. Prices, stock and delivery vary by country. If a component is unavailable, email info@creative3dp.com with your project, part and country and we’ll help you find a local purchase link.
Will my print look exactly like the images?
Renders show the design; photos show actual prints. Filament colour, layer height, print settings and the light source affect the finished appearance. Choose a warm-white LED for a warmer glow.
What printer and material do I need?
The standard puck base is 190 × 190 mm. Allow space for the chosen shade: the largest measured puck shades reach about 193 mm wide and 232 mm tall. The optional stand foot is 220 mm wide. Leave room for brims and supports.
Use the included guide for print orientation and material settings. Use LED lighting; PETG is recommended for the bulb route.
Can you help if my print or assembly goes wrong?
Yes. Email info@creative3dp.com with the design name, your printer, filament, slicer settings and a photo of the issue. We can help with printing, assembly and component selection. For a missing component, include your country so we can find a local purchase link.