Cart
0
Back to designs
3D Printable Digital Files
WorkBox – A Completely 3D-Printable Enclosed Workstation
$49.00
Digital STL files only · no shipping
Email support included
Personal Use — STL Only
STL files, printable attachments, assembly manual, printing guides and email support.
$49.00
Commercial License — Build & Sell
Everything in Personal Use plus a lifetime license to build and sell physical WorkBox products under the supplied agreement.
$99.00
Digital STL files only — no physical product is shipped.
You receive the WorkBox print files, build guides and parts list (BOM). Print the parts yourself and use the parts list to source the remaining components. Sourcing is straightforward, and we can guide you by email at info@creative3dp.com.
About WorkBox: A modular, 3D-printable enclosed workstation for sanding, trimming, support removal and everyday assembly. The clear front keeps your work visible, the removable tray catches offcuts, and the outer walls keep tools close at hand.
Digital STL files and build guides only. No physical product will be shipped. Print the parts yourself; the included BOM / parts list and support at info@creative3dp.com help you source the remaining components.
Give your projects a place of their own.
WorkBox is a modular, 3D-printable enclosed workstation for sanding, trimming, support removal, electronics projects and everyday assembly. Keep tools on the outside, your project in view and offcuts over a removable tray.
Brought to life by makers
Backed by 1,208 people on Kickstarter.
KickstarterExplore the original WorkBox campaign, which raised $70,527 against a $1,800 goal.→1,208
Kickstarter backers
$70,527
Pledged on Kickstarter
100+
Printable attachments
Modular
Printed panel structure
✓Build it one panel at a time.
✓
Printed connectors
The main structure joins with printed pins and clips, without metal screws or nuts.
✓
Modular panels
Build the workstation from smaller parts and reprint individual components when needed.
✓
Guided assembly
Follow the assembly manual, visual assembly flow and printing guides supplied in your download.
✓
Check your printer first
Confirm the largest part fits your build volume and test connector tolerances before printing everything.
✓
Source the finishing parts
You supply the 5 mm acrylic window, 60 mm puck LED and any extraction equipment.
✓
Email support
Send your order details and a photo of the assembly step to info@creative3dp.com.
Your digital build pack
From files to a finished workstation.
Both license options include the complete WorkBox build pack. You print the parts and source the non-printed components yourself.
STL
WorkBox structureModular panels and the printed pins, clips and connectors that join them.
100+
Printable attachmentsTool holders and storage pieces, with an attachments catalogue.
BUILD
Assembly documentationAssembly manual and visual assembly flow for the complete workstation.
PRINT
Printing guidancePrinting guide, orientation notes and STL file guide.
PARTS
Components and use notesNon-printed components list and important build and operating notes.
HELP
Email supportContact the Creative3DP team when you need help with your build.
Digital files only · no physical parts shipped
Key features
Clear, opening front
Lift the front to position your project, then work through the two hand-access ports with a clear view of the chamber.
Removable debris tray
Raised edges collect scraps, support pieces and offcuts. Slide the tray out to empty it after the job.
100+ printable attachments
Print holders for tools, bottles, bits and small hardware. Rearrange the outer walls as your setup changes.
Modular printed panels
Small panels join with printed pins, clips and connectors. Individual parts can be reprinted.
Rear duct connection
Connect your own extraction setup. Match the hose to the printed adapter and the work you do.
Built-in light holder
The ceiling has a recess for a 60 mm puck LED, sourced separately, to light the work area.
WorkBox shown assembled. Tools, acrylic, lighting and extraction equipment are not included.
How it works
01
Check the fit
Slice the largest part against your printer’s actual build volume. Test a few pins and connectors before the full print run.
02
Print the parts
Follow the supplied orientation guide. PETG is recommended; PLA is suitable for dry, low-heat work.
03
Join the panels
Use the printed pins, clips and connectors. Follow the assembly manual and visual flow panel by panel.
04
Fit the window and light
Measure the assembled frame before cutting the 5 mm acrylic. Fit a compatible 60 mm puck LED.
05
Arrange your tools
Choose from 100+ attachments and print the holders you need. Keep frequently used tools within reach.
06
Prepare your workspace
Connect suitable extraction if needed, position the removable tray and follow the important use notes.
Printer & build requirements
✓
PrinterA suitable FDM printer; confirm the largest part fits in your slicer.
✓
MaterialPETG recommended. PLA for dry, low-heat work; ABS/ASA with suitable print conditions.
✓
Layer heightStart at 0.2 mm and follow the supplied guide.
✓
Walls and infill2–3 walls and 15–25% infill; connector pins at 100% infill.
✓
Window and light5 mm acrylic, measured after assembly, and a compatible 60 mm puck LED.
✓
Optional extractionDucting, fan and filtration appropriate to your tools and materials.
Test before the full run: Check connector fit and follow the supplied print, assembly and use guides.
Build for yourself. Or build to sell.
Personal Use — STL Only
The complete WorkBox files and guides for your own projects. This option does not include rights to sell physical WorkBox products.
Commercial License — Build & Sell
The same pack plus a lifetime, non-exclusive, non-transferable, royalty-free license for the named licensee to manufacture and sell physical WorkBox products and included attachments.
Complete the supplied commercial agreement as instructed. Small design modifications are permitted; major changes require prior written consent.
With either option, digital files may not be resold, shared or redistributed. Commercial rights apply to physical products and are governed by the supplied agreement.
Help with your build
Your files, your workshop. Our support.
Start with the printing and components guides, then follow the assembly manual. If you hit a snag, send a photo of the step and your order details to info@creative3dp.com.
The Creative3DP team
Quick questions
Am I buying a finished WorkBox?
No. This is a digital STL and documentation package. You print the parts, source the non-printed components and assemble the workstation yourself. No physical product is shipped.
Will the parts fit my printer?
The structure is split into smaller modules for desktop FDM printing. Check the largest part in your slicer against your actual build volume before starting, using the supplied orientation and file guides.
Do I need screws or special tools?
The main structure joins with printed pins and connectors. A rubber or nylon mallet, deburring tool, flush cutters and sandpaper can help with fit and finishing. You supply the acrylic window and puck light.
Does WorkBox filter or purify the air?
No. It is an enclosure with a duct connection, not a sealed cabinet or filtration system. Provide suitable extraction, ventilation and protective equipment for your work. Printed plastic is not fireproof; keep flames and hot tools away from it.
What is the difference between the licenses?
Personal Use is for your own projects. Commercial License — Build & Sell adds the right to manufacture and sell physical WorkBox products and included attachments, subject to the supplied agreement. Neither option permits sharing or selling the digital files.
Where do I get help?
Email info@creative3dp.com with your order details and a photo of the step you are working on.